* Output Power (4 Ohm, <=1% THD) 60 Watts x 2
* Output Power (4 Ohm Bridged, <=1% THD) 150 Watts x 1
* Output Power (2 Ohm, <=1% THD) 75 Watts x 2
* Signal to Noise (1 Watt into 4 Ohms) 80 dBA
* Dynamic Power (4 Ohm) 60 Watts
* Peak Music Power 300 Watts
* Number of Channels 2
* Load Impedance Capability 2~8 Ohm (Stereo)
* 4~8 Ohm (Bridged)
* Continuous Power (4 ohm) 60W x 2
* Continuous Power (2 ohm) 75W x 2
* Continuous Power Bridged (4 ohm) 150W x 1
* Frequency Response 10Hz ~ 50 kHz
* Total Harmonic Distortion 0.008%
* Signal-to-Noise Ratio >100dB
* Dimensions 11-13/16"x 2-3/8"x 7-5/8" (300 mm x 60 mm x 194 mm)
* Bridgeable 
* Channel # Capability 2/1
* Screw-Type Speaker Terminals 
* Balanced Isolator Input Circuit 
* RCA Inputs 2 Channel
* Speaker Level Input 2 Channel
* Input Level Control Hi-Volt (400mV ~ 6.5v)
* Built-in Crossover Selectable LPF
* Crossover Frequency Range 80Hz, -12dB/Oct.
* Warranty 1 Year

A beefy power increase. An all-new design featuring an extruded heatsink with a brushed metallic surface. Speaker level inputs for easy connection to OEM headunits. Oversized power terminals. Bottom line? The 2-channel GM-3300T is a huge value in a small package.

300-Watt Max Power
Anybody have a problem with more power? We didn't think so. The GM-3300T packs an impressive wallop despite its small size, with 300-watt max power capability. It can run 60 watts x 2 at 4 ohms, 150 watts x 1 at 4 ohms, or 75 watts x 2 at 2 ohms — whichever best fits your system configuration.

Built-In Crossover (80Hz Low-Pass Filter)
Built into the GM-3300T is a very smart crossover network. It works like a gateway, routing the big bass signals (80Hz or lower, at -12dB/octave) to the speaker that handles them best, filtering out higher-frequency signals to that speaker. This optimizes your system's efficiency and delivers the best possible sound quality.

Speaker Level Inputs
What, you DON'T own a Pioneer headunit? Well, we won't hold it against you. In fact we'll even help you build onto your system. The GM-3300T's speaker level inputs allow you to connect your OEM unit (or any unit that doesn't have the typical RCA-type inputs) to the GM-3300T without having to buy add-on adapters. SO, the install goes faster, you save money, and you've got a Pioneer amp in your vehicle.